Get Free Quote

Shower Glass Door Repair in Dubai

A shower door that drags on the floor, leaks water onto the bathroom tiles or won’t stay closed can usually be fixed in one visit. We repair hinged, sliding and frameless shower doors and fixed glass screens: hinges, clamps, seals, rollers, handles and glass.

Free quotefrom photos of the door and fittings
6-month warrantyon parts and labour
Mon–Sat, 8am–7pmvisits at a time that suits you
Dubai & all emiratesvillas, apartments and offices

Why shower doors fail

A frameless shower door is a heavy sheet of toughened glass hanging on two small hinges, opened and closed several times a day in a wet, warm room. Over time the hinges loosen and the door drops, seals go hard and yellow, and white mineral deposits from tap water build up on hinges and rollers. Cleaning products that are too strong also attack seals and fittings.

Most of these faults are in the fittings, not the glass. Replacing a hinge, a seal or a roller is quick and costs far less than a new enclosure.

Frameless glass shower door in a modern bathroom
Two hinges carry the whole door, so a small drop shows up as a drag or a leak.

Shower door problems and what fixes them

ProblemUsual causeRepair
Door drags on the floor or trayHinge screws loose or hinge wornHinges re-set or replaced, door re-levelled
Water leaks under the doorBottom drip seal worn or missingNew bottom seal or sweep
Water leaks at the sideSide seal or magnetic strip wornSide seals and magnetic strips replaced
Door won’t stay closedMagnetic strip weak, hinge cam wornMagnetic seals replaced, hinge adjusted
Door swings open or closed by itselfHinges out of plumb or self-closing cam wornHinges re-set or replaced
Hinge squeaks or feels stiffMineral build-up or worn hingeHinge cleaned and adjusted, or replaced
Fixed panel moves or wobblesLoose glass clamps or support barClamps and support bar re-fixed or replaced
Sliding shower door jumps or sticksWorn rollers, limescale on the railRollers replaced, rail cleaned and re-aligned
Handle or knob looseWorn washers or fixingHandle re-fixed or replaced
Black or peeling silicone, leaks at the baseOld silicone has failedOld silicone removed, joints resealed
Cracked, chipped or shattered glassImpact, edge damage or a hinge under strainNew toughened pane made to size

Why is my shower door leaking?

Run the shower with the door closed for a minute, then look for where the water appears. The spot tells you which part has failed.

Under the door

The drip seal along the bottom edge is split, hard or missing, or the door has dropped and the seal is bent. A new seal, plus a hinge adjustment if needed, stops it.

At the hinge side

The gap between the door and the wall or fixed panel has lost its side seal. We fit a new seal cut to the glass thickness.

Where the door closes

The magnetic strips no longer pull the door tight, or the door no longer meets the panel square. New magnetic seals and a hinge re-set close the gap.

Along the base or tray

The silicone line has cracked or come away, so water gets behind the glass. We cut out the old silicone, dry the joint and reseal it.

Shower glass that breaks by itself

Shower doors are made from toughened (tempered) glass, which breaks into small, blunt pieces instead of large sharp shards. That is why it is used, but it also means a pane can’t be cut, drilled or repaired once it is damaged (more on tempered glass).

A pane that shatters with no one touching it usually had a chip on its edge, or was under strain from a hinge or clamp that was set too tight or had worked loose. Much more rarely, a tiny nickel sulphide particle trapped in the glass during manufacture expands over time and breaks it from the inside. Glass makers explain this in their technical note on nickel sulphide.

If your shower glass has broken

  • Keep everyone out of the bathroom and don’t walk in barefoot
  • Don’t pull loose pieces out of the hinges or clamps by hand
  • Take a photo of the frame, hinges and any glass still in place and send it to us
  • We remove the remaining glass, check the fittings and measure for a new pane

Shower enclosures we repair

Hinged shower doors

Frameless and semi-frameless doors on wall-to-glass or glass-to-glass hinges, the most common type in Dubai bathrooms.

Sliding shower doors

Doors on a top rail with rollers and a floor guide. We replace rollers, guides and stoppers.

Walk-in and fixed screens

Single fixed panels held by clamps, a U-channel and a support bar. We fix wobbly panels and failed seals.

Corner and bathtub screens

Corner enclosures and bath screens, including folding bath screens and their hinges.

Two technicians fitting a frameless glass shower panel
Glass panels are fitted and levelled by two people.
Frameless shower glass enclosure in a bathroom
Door and fixed panel: hinges, clamps and seals are the parts that wear.

Shower door parts we replace

Shower hinges

Wall-to-glass and glass-to-glass hinges in 90°, 135° and 180° versions, matched to the glass thickness and finish.

Seals and magnetic strips

Bottom drip seals, side seals, bubble seals and magnetic closing strips, cut to the length and glass thickness of your door.

Clamps and support bars

Glass clamps and wall-to-glass support bars that keep fixed panels rigid. Loose ones are a safety risk and should be fixed quickly.

Rollers, rails and guides

Top rollers, rails, floor guides and stoppers for sliding shower doors.

Handles and knobs

Pull handles and knobs replaced in chrome, black, gold or other available finishes.

Glass and silicone

Broken panes replaced in toughened safety glass made to size, and failed silicone joints removed and resealed.

Shower hinges, seals and the parts that actually leak

A shower door that drips is almost never a glass problem. It is a hinge that has dropped a few millimetres, or a seal that has gone hard and stopped touching the glass. Both are cheap parts. Getting the right one is the difficult bit, because shower hardware is not standardised, and most of what is fitted in Dubai apartments comes from three or four different system suppliers. If the panel itself is damaged rather than the hardware, new enclosures are covered on our frameless shower glass page.

Hinges

Wall-to-glass

Fixed to the tiled wall on one side, clamped to the glass on the other. The wall plate is usually the part that works loose, because the fixings are into tile and whatever sits behind it.

Glass-to-glass

Joins an opening panel to a fixed one, normally at 90 or 180 degrees. Replacing it means matching the angle and the glass thickness, not just the look.

Pivot and cam adjustment

Most quality shower hinges have an internal cam that sets the self-closing angle and the zero point. A door that swings open on its own has usually lost its cam setting, not its hinge.

Gaskets inside the clamp

Thin rubber pads between metal and glass. When they flatten the panel shifts, the door drops at the handle side and starts catching on the tray. The hinge looks fine and the door is not.

Seals and water management

  • Magnetic strips the two profiles that meet when the door closes. They come in matched pairs at set angles, so a strip bought on its own usually will not close flat.
  • Bottom sweep and drip strip the clear fin that throws water back into the tray. This is the single most common cause of a puddle outside the shower, and it is a five minute part.
  • Side and U-channel seals the fins that run down the hinge side and along a fixed panel. They harden with heat and cleaning chemicals and stop bending back.
  • Silicone line the bead where glass meets tile or tray. Silicone is a waterproofing joint, not an adhesive. If a panel is being held up by silicone, the fixing underneath has already failed.
  • Support bar and bracket the bar across the top of a walk-in panel. A loose bracket lets the panel flex, which breaks the silicone line and starts the leak somewhere else entirely.

What cannot be done to shower glass

Shower panels are toughened safety glass. Once toughened they cannot be cut, drilled or edged. That has three practical consequences worth knowing before anyone quotes you:

  • New hinges must match the existing cut-outs exactly, or the panel has to be remade.
  • A chipped edge cannot be polished out. It can be monitored, but the chip is a stress point.
  • Glass that shatters into small cubes on its own has not been hit. That is usually a nickel sulphide inclusion or an edge stress that was there from the day it was installed.
Find your own leak in two minutes dry the floor, close the door and run the shower onto the glass only. Water on the hinge side means a seal, water at the handle side means the door has dropped, water under the frame means the silicone line or the tray.

Shower door repair prices in Dubai (2026)

Typical prices, including the visit, labour, parts and a 6-month warranty. We confirm the price from your photos before booking.

JobTypical price (AED)
Seal replacement, full door300–500
Handle replacement250–450
Toughened glass replacement, 8–12mm, per m²500–800
Hinges, clamps, rollers and resealingQuoted from photos

Hinge and roller prices depend on the brand, finish and glass thickness, so we price them from a photo of the existing fitting.

What a shower door repair visit involves

  1. Check. We open and close the door, check it’s level and find where water escapes.
  2. Support the glass. The door is held while hinges or clamps are loosened, so the glass isn’t strained.
  3. Replace. Worn hinges, seals, rollers or handles are swapped for parts matched to the glass thickness and finish.
  4. Reseal. Failed silicone is cut out and the joints resealed where needed.
  5. Test. We run water against the door to check the leak has stopped.

Fresh silicone needs time to cure, so we tell you how long to wait before using the shower.

Technician applying a silicone seal along the base of a bathroom door frame

Keep your shower door in good shape

After each shower

Squeegee the glass

Removing water stops mineral deposits building up on the glass, hinges and seals.

Weekly

Use a mild cleaner

Avoid abrasive pads and strong descalers on hinges and seals. They damage finishes and harden rubber.

Every few months

Check the fittings

If the door has started to touch the floor or the panel moves, get the hinges and clamps tightened before the glass is stressed.

Shower door repair FAQs

Why is my shower door leaking at the bottom?

The bottom drip seal is worn, split or missing, or the door has dropped so the seal no longer meets the floor. A new seal and a hinge adjustment usually stop it.

Why does my shower door leak even when it’s closed?

Water is escaping through a worn side seal, weak magnetic strips or failed silicone at the base. Run the shower and see where the water appears, then send us a photo of that spot.

Can a sagging shower door be fixed?

Yes. We tighten or replace the hinges and re-level the door so it clears the floor and closes evenly against the seals.

Can you replace just the seal?

Yes. Seals and magnetic strips are replaced on their own. Send a photo of the door edge so we can match the profile and glass thickness.

Can cracked shower glass be repaired?

No. Shower glass is toughened safety glass and can’t be repaired once cracked or chipped. The pane is replaced with new glass made to size.

Why did my shower glass shatter on its own?

Usually an edge chip or strain from a hinge or clamp. Rarely, a tiny nickel sulphide particle in the glass causes it. In every case the pane is replaced and the fittings are checked.

Can one panel of a shower enclosure be replaced?

Yes. A single door or fixed panel can be replaced with new toughened glass made to the same size, keeping the other panels and fittings if they are in good condition.

Is it safe to use a shower with a wobbly glass panel?

It’s best not to. A loose clamp or support bar puts strain on the glass. Get the fittings tightened or replaced before using the shower normally.

How long does a shower door repair take?

Hinge, seal, handle and roller jobs are usually done in one visit of 1–2 hours. Glass replacement needs the pane made to size first.

Do you repair sliding shower doors?

Yes. We replace rollers, rails, floor guides and stoppers, and clean and re-align the track so the door slides smoothly.

Where we repair shower glass in Dubai and the UAE

Most shower door callouts are same-week jobs, so we group them by area. From the workshop in Al Qusais Industrial First we cover the whole of Dubai: apartment bathrooms in Dubai Marina, JLT, JBR, Business Bay, Downtown and Dubai Creek Harbour, and villa ensuites in Jumeirah, Umm Suqeim, Al Barsha, Mirdif, Arabian Ranches, Dubai Hills Estate and The Springs. Hotel and serviced-apartment work across Deira and Bur Dubai is usually booked as a batch of rooms rather than one at a time.

Abu Dhabi, Sharjah, Ajman and the northern emirates are covered on booked visits rather than same-day, because a shower repair needs the right hinge or seal on the van before we set off. Send a photo of the hinge and the bottom of the door and we will confirm the part and the price before the trip.

Other repairs and new shower glass

For sliding, folding, pivot and office doors and aluminium windows, see our main glass door repair page, and for patio and balcony doors see sliding door repair. If your enclosure is past repair, see our frameless shower glass range, including sliding shower glass doors.

Stop the leak, fix the drag

Send a photo of the door and its hinges on WhatsApp. We’ll tell you what’s wrong and what it costs before anything is booked.